Fuel pump Suntec J7CCE 1002 4P

Suntec J7CCE1002 oil pump – a device that includes a pressure regulating valve with shut-off function. The gear assembly draws fuel from the tank through an integrated filter, then delivers it to the pressure regulating valve and further to the nozzle line. Excess fuel that does not pass through the nozzle circuit is discharged via the valve into the return line in a two-pipe system. In a single-pipe configuration, the fuel is redirected back to the pump suction side. In this case, the bypass plug must be removed from the return port, and the return connection must be sealed with a steel plug fitted with a sealing washer. Suntec J 7 CCE 1002 oil pump application: Diesel fuel and medium viscosity liquid fuel Single- or double-line system Usually used with an external electromagnetic valve Suntec J7CCE 1002 oil pump technical data: Weight: 4.15 kg Fuel injection pressure range: 10 - 30 bar Factory set pressure: 12 bar Operating viscosity: 2 - 75 mm²/s (cSt) Fuel temperature: 0 - 90°C in the pump Inlet pressure: 1.5 bar max Outlet pressure: 1.5 bar max Suction lift: 0.45 bar vacuum to prevent air separation from fuel Nominal speed: 3600 rpm max Torque: 0.30 H.M Mounting: Flanged according to European standard EN225 Mesh filter: Open area: 45 cm², hole size: 170 µm Shaft: 11 mm according to European standard EN 225 Bypass plug: Installed in the return line for a double line system, removed with a 3/16" hex key for a single line system