Suntec J6CCE 1002 5P oil pump

The Suntec J6CCE 1002 oil pump is equipped with a pressure regulating valve with a shut-off function. The gear assembly draws fuel from the tank through an integrated filter and supplies it to the valve and then to the nozzle line. In a two-pipe system, excess fuel is discharged into the return line, while in a single-pipe configuration it is routed back to the suction side. In this case, the bypass plug must be removed and the return port sealed with a steel plug and sealing washer. Suntec J6CCE1002 oil pump application: Diesel fuel and medium viscosity liquid fuel Single- or double-line system Usually used with an external electromagnetic valve Suntec J 6 CCE 1002 oil pump technical data: Weight: 4.15 kg Fuel injection pressure range: 10 - 30 bar Factory set pressure: 12 bar Operating viscosity: 2 - 75 mm²/s (cSt) Fuel temperature: 0 - 90°C in the pump Inlet pressure: 1.5 bar max Outlet pressure: 1.5 bar max Suction lift: 0.45 bar vacuum to prevent air separation from fuel Nominal speed: 3600 rpm max Torque: 0.30 H.M Mounting: Flanged according to European standard EN225 Mesh filter: Open area: 45 cm², hole size: 170 µm Shaft: 11 mm according to European standard EN 225 Bypass plug: Installed in the return line for a double line system, removed with a 3/16" hex key for a single line system