Pressure switch Dungs LGW3C2 230167

Dungs LGW3C2 230167 pressure switch is designed for automatic control of burner operation by switching when pressure deviations occur. Dungs LGW3C2 230167 differential pressure switch can turn on, off, or restart the system based on the actual pressure deviating from the set value. Users can adjust this switching point using a special adjustment wheel equipped with a scale for easy setup. Each high-pressure chamber is equipped with a stepped connection, allowing for connections ranging from 6 mm to 4 mm in diameter. To ensure precise operation, a special switching system is used, which operates on frictionless bearings. Dungs 230167 LGW3C2 differential pressure switch technical data: Setting range: 0,2-3 mbar Max. operating pressure: 50 mbar (5 kPa) Pressure connection: Hose connecting piece suitable for hose ø 4 / ø 6 Ambient temperature: -15 °C to +85 °C Medium temperature: -15 °C to +85 °C Storage temperature: -30 °C to +85 °C Housing: Polycarbonate Switch: Polycarbonate Membrane: NBR Electrical connection: At screw terminals via PG* 11 cable gland (*=heavy-gauge conduit thread) Degree of protection: IP 54 as per IEC 529 (DIN 60 529), optional IP 65 Setting tolerance:  ± 15% switching point deviation referred to reference value adjusted as vertical diaphragm position Dungs LGW3C2 230167 pressure switch approvals: EC type test approval as per EC Gas Appliance Directive: CE-0085 AQ 0693 EC type test approval as per EC Pres- sure Equipment Directive: CE0036 Approvals in other important gas-consuming countries.