Pressure switch Dungs GW10A5 225938

Dungs 272350 GW10A5 pressure switch is a compact pressure switch for multiple actuators. Dungs GW10A5 272350 differential pressure switches are suitable for switching a circuit on, off or over on changes in actual pressure relative to the set switching point (reference value). The switching point can be set easily and quickly using a setting wheel pro- vided with a scale without using a pressure gauge. Dungs GW10A5 272350 different pressure switch technical data: Adjusting range [mbar]: 2-10 Max. operating pressure: 500 mbar (50 kPa) Pressure connection: O ring flange connection on underside of pressure switch Measuring connection: ø 9, length 10 mm, with screw plug Ambient temperature: 15 °C to +70 °C Medium temperature: 15 °C to +70 °C Storage temperature: -30 °C to +80 °C Electrical connection: Plug connection for line sockets as per DIN EN 175 301-803 , 3-pin, protection insulated without ground connection Degree of protection: IP 54 as per IEC 529 (EN 60529) Setting tolerance: ±15% switching point deviation referred to reference value, adjusted at pressure rises, vertical diaphragm position Housing: Aluminum die casting Switch: Polyamide Diaphragms: NBR Switching contact: Ag (fine silver) Dungs GW10A5 272350 pressure switch functional description: Short response time during pressure fluctuations. Single-acting Dungs 272350 GW10A5 pressure switches in overpressure range. Dungs GW10A5 272350 pressure switches operate without any power supply. Dungs 272350 GW10A5 pressure switch is a single-acting pressure switch acting in pressure range. The control unit responds to pressure. If the set reference value is exceeded or undershot, the circuit is switched on, off or over. Dungs 272350 GW10A5 pressure switch approvals: EC type test approval as per EC Gas Appliance Directive: CE-0085 AO 0012 EC type test approval as per EC Pressure Equipment Directive: CE0036