Pressure switch Dungs LGW10A4 2215919

Dungs 232717 LGW10A4 pressure switch is an adjustable differential pressure switch for combustion units. Dungs LGW10A4 232717 pressure switch is used to turn on, off or switch the electrical circuit to a set pressure value when the actual value changes. The setpoint (switching parameter) is set using an adjustment wheel with a scale. There is a measuring flange in the metal housing. Dungs 232717 LGW10A4 differential pressure switch technical data: Setting range: 1-10 mbar Maximum operating pressure: 500 mbar (50 kPa) Measuring connection: A measuring fitting ø 9 is integrated in the metal housing Ambient temperature: -15 °C to +70 °C Ambient temperature: -15 °C to +70 °C Storage temperature: -30 °C to +80 °C Lower part of the body: Aluminum die-cast Casing: Polycarbonate Switch: Polycarbonate Membrane: NBK Switching contact: Standard: High purity silver (Ag) Degree of protection: IP 54 according to IEC 529 (EN 60529) (transparent casing) Setting: Vertical position at falling pressure. The setting of the rising or falling parameter can be performed at the installation site. In case of deviation of the mounting position, take into account the change in the switching point. Control range: 15% deviation from the switching point relative to the setpoint and installation in a vertical position Preset: Standard version: blue. Execution of “Y": yellow Dungs 232717 LGW10A4 pressure switch application: It is used in furnace units, ventilation units and air conditioning units. Dungs 232717 LGW10A4 differential pressure switch is used for air, flue and exhaust gases. Dungs LGW10A4 232717 overpressure switch is used for gases of families 1, 2, 3 and other neutral gaseous media. Dungs 232717 LGW10A4 pressure switch functional description: Dungs 232717 LGW10A4 differential pressure switch operates in the range of over and under pressure. The differential pressure acts through the diaphragm on the microswitch, counteracting the force of the mounting spring. No auxiliary energy is required for the operation of the relay. Dungs LGW10A4 232717 pressure switch approvals: Has a certificate of the European Community on passing tests of samples in accordance with EU regulations on gas equipment: CE-0085 AQ 0673 Has a European Community certificate of passing tests of samples in accordance with EU regulations on pressure equipment: CE0036 There are permits for the operation of other countries consuming gas. It has a certificate of the state technical Supervision Service for testing as a pressure switch of a special design according to TRD 604 standards and VdTÜV No. 100/1, as well as in accordance with class “S“ according to EN 1854.