Zawór gazowy Honeywell „VK8515MR4571”

This Honeywell gas valve, listed under catalogue article 534.331.100 and manufacturer code VK8515MR4571U, belongs to the range of VK series valves. Parts of this type shut off and meter the gas supply to the burner. They open on command from the burner control only when the gas pressure switch permits; in premix boilers a pneumatic gas/air link ties the valve to the fan. Such valves are a critical component in the fuel admission step of the ignition sequence: after pre-purge and spark, the burner control energises the valve coil, gas flows, and the flame proving system confirms ignition. Selection of a replacement gas valve depends on three parameters: connection size (typically Rp 1/2" to 2" or flanged), coil voltage (230 V or 24 V AC/DC), and function type (single or double solenoid, slow opening, servo-regulated, multiblock with integrated filter and regulator). The VK8515MR4571U is a specific variant within its series, but the engineer must verify these parameters against the original installation. Common failure modes for valves of this class include coil burnout, leaking seat, drifting outlet pressure, and a seized servo regulator. The coil is often replaceable separately from the valve body, which may allow a lower-cost repair if the valve body is sound. When replacing, ensure the gas supply is isolated and that the valve's orientation and mounting match the original to avoid stress on the pipework.