Przełącznik ciśnieniowy Fema PTI6

This pressure switch, listed under the Fema brand with catalogue number 444.208.009 and manufacturer code PTI6, belongs to the class of components that monitor pressure or airflow in a burner system. Parts of this type are wired into the safety loop of the burner control. Their function is to confirm that the pressure of the medium (air or gas) stays within the permitted band. When the switch changes state, it sends a permission signal that allows the burner control to proceed through the ignition sequence. For example, an air pressure switch proves that the fan is delivering sufficient purge airflow before the control attempts to light the burner. A gas pressure switch guards against supply pressure falling below a minimum or rising above a maximum, both of which can cause unsafe or unstable combustion. When selecting a replacement for a pressure switch of this type, the key parameters are the medium being monitored (air or gas), the switching range and differential, the type of connection (thread or hose spigot), the electrical contact rating, and any applicable approval class. The impulse tube that connects the switch to the pressure source must be clear and correctly routed to avoid false readings. Common failure modes include a torn diaphragm, a blocked or kinked impulse tube, or a drift in the setpoint that causes the switch to trip prematurely or fail to trip. These faults typically present as a burner lockout that can be mistaken for an ignition problem. During troubleshooting, verifying the pressure switch’s state with a manometer and checking its continuity against the setpoint is a standard diagnostic step.