+370 661-08345Wysyłka do UE
Wszystkie ceny bez VATPomocŚledź zapytanie
Brahma NDE11 moduł sterujący palnika CAM10416
Brahma

Brahma NDE11 moduł sterujący palnika CAM10416

SKU 246.124.967Na zamówienie
99,00 €bez VAT
Zapytaj o cenę
Wysyłka do UE

The Brahma NDE11 burner control unit, listed as catalogue article 246.124.967-2 with manufacturer code CAM10416, is a control box that functions as a flame safeguard for gas or oil burners. Parts of this type manage the entire ignition and safety sequence: they initiate pre‑purge, energise the ignition transformer, open the fuel valve, monitor the flame signal from an ionisation electrode or UV/IR detector, and lock out on failure within the specified safety time. The control also reads pressure switches (air, gas) and drives the fan and valve accordingly. Because the control governs the burner’s safe start and shutdown, correct selection is essential. When choosing a replacement control of this class, the critical parameters are the exact series and type designation, supply voltage, pre‑purge and safety times, and the flame detection method (ionisation, UV, or IR). The base or plug pattern must also match the existing wiring base. Controls are normally not interchangeable across series, even within the same brand; using a unit with mismatched safety times creates a safety hazard, not just a performance issue. The NDE11 series belongs to Brahma’s product range, and the specific article code confirms its identity, but its voltage and timing details are not stated here and must be verified against the original burner documentation. In a typical burner system, this control unit connects to the gas valve, ignition transformer, fan, air pressure switch, and the flame sensor. It receives the heat demand signal from the thermostat or controller and then steps through the sequence autonomously. When servicing, ensure that the new unit has the same base wiring and that all connected components are in good working order, as a faulty pressure switch or flame detector will cause immediate lockout. For modern wall‑hung boilers, electronic board‑based controls serve the same role but are matched to the boiler model; this type of standalone control box is common in larger or industrial burners.

Numery i zamienniki

2
Article246.124.967
SKUCAM10416