Brahma 13643703 E8/S*Valvola del gas CFD

Brahma E8/S*CFD 13643703 are gas solenoid valves belonging to the 1/8” and 1/4” series and capable of operating at pressures up to 1 bar. These gas valves are of a normally closed type and are suitable for both civil and industrial applications. They can be powered by alternating or direct current. Brahma E8/S*CFD 13643703 valves comply with the EN161 standard and have a CE type certificate (CE Reg.  No. 63AQ0626) in accordance with European Directives 90/396 and 93/68. This confirms their compliance with high safety and quality standards. Technical specifications Class: A Group: 2 Supply voltage (1): 230 V / 50-60 Hz Operating temperature: -10°C / +60°C Closing time: <= 1 sec Opening time: <= 1 sec Installation: vertical and horizontal Body: die-cast brass Operating pressure (mbar): 0-100 Hole diameter (mm): 6 Weight of joints (g): +-270 The ability to set the pressure measurement point: yes Connection: G1/4” F Winding type: DC power supply. Connection type: Quick-on connection for DIN43650-IP65 plug Installation When installing the Brahma E8/S*CFD 13643703 gas valve, it is necessary to comply with applicable national and European standards, such as EN60335-1, regarding electrical safety. Place the valve at the installation site so that the arrow on the housing indicates the direction of fuel flow. This is important for proper operation and efficient use. When installing the Brahma E8/S*CFD 13643703 gas control unit to the mounting pipeline, avoid twisting the shell and always use a hex key to install it into the valve body. This will ensure a secure attachment and prevent possible problems. Make sure that no foreign objects have entered the housing of the Brahma E8/S*CFD 13643703 gas control block to avoid damage and ensure smooth operation of the valve. Check that the maximum fuel inlet pressure never exceeds the value indicated on the label. This is important for the safety and durability of the valve.