Pompe à huile Suntec D47A7383

Suntec D 47 A 7383 gear-type liquid oil pump is specifically adapted for fuel oil with a viscosity of up to 75 cSt and for operation at elevated fuel temperatures up to 90 °C. Suntec D47A 7383 oil pump adjustment: The gear set draws fuel from the tank through an integrated filter and delivers it to the pressure regulating valve. The fuel is then supplied to the nozzle line. Fuel that does not pass through the nozzle is discharged through the valve into the return line in a two-pipe system. In a single-pipe system, the fuel is returned to the suction side. In this case, the bypass plug must be removed from the return line and the return port must be closed with a steel plug and washer. Suntec D47A7383 oil pump technical data: Mounting: hub or flange mounting according to EN 225 Connection thread: cylindrical according to ISO 228/1 Suction and return line: G¼" Nozzle outlet: G⅛" Pressure gauge port: G⅛" Vacuum gauge port: G¼" or G⅛" Valve function: pressure regulation without shut-off function Screen filter: open area 12 cm2 Filter mesh size: 530 µm Shaft: Ø 8 mm according to EN 225 Bypass plug: installed in the return line for two-pipe systems; removed with a 4 mm hex key for single-pipe systems Nozzle pressure range: 10–28 bar Factory pressure setting: 14 bar Operating viscosity: 2–75 mm2/s (cSt) Fuel temperature in pump: 0–90 °C Inlet pressure: max. 2 bar Outlet pressure: max. 2 bar Suction lift: max. 0.45 bar vacuum Nominal speed: up to 3600 rpm Torque: 0.10 N·m