Câble Honeywell « ASY782 » avec LED + câble « 15ft » pour « s700/s800 »

This Honeywell cable is intended for use with Honeywell S700/S800 series controls. It includes an LED indicator and a 15-foot lead (approximately 4.6 m). Cables of this type connect a control unit to a component such as a flame detector or sensor, carrying electrical signals and power for operation. The built-in LED provides a visual status indication, which can be used during commissioning or troubleshooting to confirm the signal path is active. When selecting a replacement cable, the critical factors are connector type at each end, cable length, conductor count, and whether the LED circuit is integrated. The 15-foot length in this article suits installations where the control and the connected component are mounted at a distance from each other. Check that the connector pattern matches both the control socket and the component socket, as incorrect connectors can cause poor contact or signal loss. The LED may be polarity‑sensitive; consult the wiring diagram for correct orientation. Use only a cable specified for the exact control model, because pin assignments and LED circuit wiring vary between series.