Sensor-presostato Dungs KS1000C2 217776

Dungs 217776 KS1000C2 pressure switch is designed to monitor the discharge pressure, pressure difference and overpressure of gas and air. When the pressure difference increases or decreases beyond the limit of the permissible value, the contact closes and a signal is sent to the control device. The adjustment scale with digital setpoint designations makes it easy to adjust the switch. Dungs 217776 KS1000C2 differential pressure switch technical data: Adjustable measuring range: 100-1000 Pa Response range: 40 Pa Max. operating overpressure: 5 kPa Max. working pressure: 50 mbar (5 kPa) Ambient temperature: -15 °C ... +85 °C Working environment temperature: -15 °C ... +85 °C Storage temperature: -30 °C ... +85 °C Type of protection: IP 54 Dungs KS1000C2 217776 pressure switch position during installation: When mounted in a horizontal position, the pressure switch is triggered at a pressure greater than about 0.2 mbar. When mounted in an inverted horizontal position, the pressure switch is triggered at a pressure less than about 0.2. When installed in an intermediate position, the pressure switch is triggered at a pressure that differs from the set set pressure by no more than ± 0.2 mbar. Dungs 217776 KS1000C2 pressure switch adjusting: Remove the casing using a special tool, screwdriver No. 3 or PZ 2. Remove the cover. Set the pressure switch to the set pressure value using the adjustment wheel with a scale. Install the cover in place! Dungs KS1000C2 217776 differential pressure switch electrical connection: Through the PG11 cable gland with tension relief, on screw terminals for cables from 7 to 12.5 mm. The switching contacts of the device are made of galvanically gilded pure silver, for 24 V DC; 0.02 A. When using devices in conventional technology, an alternating current of 250 V (resistive load of 5 A), an inductive load of 3 A with gold-plated contacts burns out.