Brahma 15911101 TC2LTCA Zündtransformator

BRAHMA TC2LTCA 15911101 ignition transformers are compact devices specially designed for use in gas and liquid fuel burners, covering a wide range of needs from domestic to industrial installations. These transformers operate on a high-frequency electronic generator, providing an output voltage of up to 15 kV. All modifications can be equipped with a filter to reduce electromagnetic interference, which complies with the standards of Directive 2004/108/EC. Versions are also available for continuous operation with a 50% cycle for 2 minutes. Main Features 1. Compact and versatile application: The TC2LTCA 15911101 ignition units are designed for use in various burners, providing reliable ignition in both domestic and industrial environments. 2. High-frequency electronic generator: They operate on the basis of a high-frequency electronic generator that provides efficient generation of output voltage up to 15 kV. 3. Interference reduction filter: All models provide the possibility of installing a filter capable of reducing electromagnetic interference, in accordance with Directive 2004/108/EC. 4. Options for continuous operation: Transformer versions with a 50% duty cycle are available, which ensures continuous operation for 2 minutes. Features - The possibility of delivery with an integrated EMC filter; - 100% duty cycle; - Compact size and low weight; - High efficiency and ignition power; - Low power consumption; - Single or two-pin high voltage output; - Various fastening and connecting systems; - Built-in short circuit protection; - Safety in gas and liquid fuel burners depends on the controller. These features make TC2LTCA 15911101 transformers a reliable and efficient solution for ignition systems in various conditions of use. Technical information Number of contacts: 2; Peak output voltage: 2*12 kV;; Output voltage frequency (1): 6 kHz; Output voltage frequency (2): 10 kHz; Power Consumption: 55 VA; Supply voltage: 220-240 V 50/60 Hz (can be on request: 110-120 V 50/60 Hz); Operating temperature: -10 ... +60 °C; Protection: IP00; Recommended spark distance: 3-5 mm; Maximum length of ignition cable: 1.5 m; Standard power cable length: 560mm; Weight: about 420 g. Installation When handling BRAHMA TC2LTCA 15911101 ignition units, please note the following: - ATTENTION! HIGH VOLTAGE. - Connect and disconnect the BRAHMA TC2LTCA 15911101 spark transformer only after the power is turned off. - The installation must comply with national and European electrical safety standards such as EN60355-1 / EN50165. - Ensure that the valve body is connected to the ground to protect against electric shock (EN60335-1). - The BRAHMA TC2LTCA 15911101 transformer with ignition cable can be installed in any position. - Avoid placing high-voltage cables next to other wires. - Provide the necessary level of protection in accordance with the installation requirements.