Honeywell RM7850A1001 burner control

Honeywell RM7850A1001 manager provides automatic setting of the sequence of operations of the burner, flame control, system status indication, system or self-diagnosis, as well as fault detection. Possibility of access for external monitoring of electrical voltage. Flexibility of application and availability of a communication interface. Five LEDs provide information about the execution of the sequence of operations. Five-function switch – operating mode/testing. Interchangeable removable flame signal amplifiers. Local or remote provision of information on the operation of equipment or failures (optional). Non-volatile memory for saving files on the history of the process and the lock status in case of a power failure. Compatible with existing Honeywell flame detectors. Honeywell RM7850A1001 automatic burner control unit technical data: Start-up period: 2 seconds Postoperative purge: 2 seconds Dimensions: width - 127 mm; height - 127 mm; thickness - 133 mm with base Q7800A, thickness - 155 mm with base Q7800B. Weight: 0.7 kg Ambient temperature: -40 C to +60 C (-40 F to +140 F) Transport temperature: -40 C to +66 C (-40 F to +150 F) Humidity value: constant relative humidity 85%, non-condensing Power Supply: 220-240 V, 50/60 Hz Energy dissipation: 10 W max. Fuse: 20 A max. FRN type or equivalent Vibration: 0.5G in the immediate environment Connected load: only 2000 VA max. Honeywell RM7850A 1001 burner controller required components: Q7800A,B 22-pin mounting base Flame signal amplifiers R7824, R7847; R7848; R7849; R7861, R7886 Removable ST7800A purge timer cards Honeywell RM7850 A 1001 burner control accessories: Q7700 Network Interface Unit Controlbus S7810A data bus module S7820 Remote Reset (reset) module ZM7850A Combustion System Manager software 221818A Extension cable kit, 1524 mm long 221729C Dust Cover