+370 661-08345تتوفر خدمة الشحن إلى دول الاتحاد الأوروبي
جميع الأسعار لا تشمل ضريبة القيمة المضافةمساعدةتتبع الاستفسار
KROM
Honeywell C7027A1023 كاشف الأشعة فوق البنفسجية «مينيبير»
Honeywell

Honeywell C7027A1023 كاشف الأشعة فوق البنفسجية «مينيبير»

SKU 534.211.016حسب الطلب
‏450.00 €غير شامل ضريبة القيمة المضافة
اطلب عرض السعر
تتوفر خدمة الشحن إلى دول الاتحاد الأوروبي

Honeywell C7027A1023 UV sensors are used to detect the presence of ultra-violet radiation emitted by a flame. Flame detectors are used with Honeywell flame monitoring systems to detect the presence of flames in gas, oil and combined burners. Features • The C7027A1023/U flame detectors are used together with the R7249A, R7290A, R7749B and R7849A,B amplifiers and the corresponding Honeywell control devices. • The Resideo C7027A1023/B flame sensor has a built-in cuff with 1/2-14 NPSM internal thread for installation on a ½-inch inspection tube. • Due to its compact size, the Honeywell C7027A 1023 is well suited for installation on a purge pipe. • When properly installed, the C7027A1023 can be used at pressures up to 5 psi. • Two flame detectors C7027 A 1023 can be connected in parallel in cases where flame reading is difficult. • The C7027A 1023/U photocell is only used with the R7851B flame amplifier and the corresponding Honeywell control devices. • The flame detector C7027 A 1023/U has a built-in cuff with 1/2-14 NPSM internal thread for installation on a ½-inch inspection tube. Specifications • Ambient temperature: -18°C to 102°C or -40°C to +102°C, depending on the model. • Maximum pressure: 5 psi (34.5 kPa). • Installation: Cuff with 1/2-14 NPSM internal thread for installation on a ½-inch inspection tube. • Electrical connections: Two wires 6 ft [1.83 m], color-coded, NEC Class 1. (One model comes with wires 24 ft [7.32 m] long). At the back of the detector there is a clamping contact for a ½-inch flexible metal conductor. (There are also models with a pressure contact and an internal thread of ½-inch). • Spare Parts: Flange seal 129685 • Ambient temperature range: -18°C to +121°C or -40°C to +121°C, depending on the model. • Maximum allowable pressure: 5 psi (34.5 kPa). • Installation: Cuff with 1-11-1/2 NPSM internal thread for installation on a one-inch inspection tube. (DIN-certified model C7035A1064 has thread 1-11 BSP.P1). Spare parts 1. Flange seal 129808 2. UV reading tube 139464M 18° – + 121°C 3. UV reading tube 139464N 18° – + 121°C

الرموز والإحالات المرجعية

3
Article534.211.016
SKUC7027A1023/U
RefC7027A1023/U, 534.211.016