مجموعة ACV 90448197 3 الأنودات hor.28x1200 LCA2500>3000

This article is a replacement anode kit of the magnesium type, intended for use in enamelled storage cylinders. Magnesium anodes protect the cylinder lining by corroding preferentially, thereby preventing pitting and rust formation. They are consumable components that are checked and replaced during scheduled service intervals. The kit contains three anodes, horizontally installed, with a diameter of 28 mm and a length of 1200 mm. When selecting a replacement anode set of this type, the critical parameters are the original anode dimensions and the orientation of the fitting. The diameter and length must match the existing installation to ensure the anode rod fits inside the cylinder without contact with the internal surfaces. The horizontal orientation indicates that the anodes are inserted through side-mounted sockets. The magnesium material is the standard choice for enamelled cylinders; alternative materials such as aluminium or titanium are available but require careful evaluation of water chemistry to avoid over-protection or under-protection. During replacement, the condition of the anode cores should be assessed. If the magnesium has been consumed to less than half the original diameter, or if the core wire is exposed, replacement is due. The new anodes must be tightened to the correct torque and the sealing washers replaced to prevent leakage. It is also advisable to inspect the cylinder interior for any signs of corrosion damage before fitting the new set.